Default Ieee 802.1P Classifier - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

Default IEEE 802.1p Classifier

Related
Documentation
956
Table 56: Default MPLS Classifier (continued)
Code Point
111
Understanding How Behavior Aggregate Classifiers Prioritize Trusted Traffic on page 950
Default Behavior Aggregate Classification Overview in ACX Series on page 953
Overview of BA Classifier Types
Table 57 on page 956 shows the forwarding class and PLP that are assigned to the
IEEE 802.1p CoS bits when you apply the explicit default IEEE 802.1p classifier. To do
this, include the statement at the
default
hierarchy level:
classifiers ieee-802.1]
[edit class-of-service interfaces interface-name classifiers ieee-802.1]
default;
Table 57: Default IEEE 802.1p Classifier
Code Point
000
001
010
011
100
101
110
111
Configuring the IEEE 802.1p Field for CoS Host Outbound Traffic in ACX Series on
page 889
Configuring a Global Default IEEE 802.1p Value for All Host Outbound Traffic in ACX
Series on page 889
Applying Egress Interface Rewrite Rules to the IEEE 802.1p Field for All Host Outbound
Traffic on the Interface in ACX Series on page 890
Forwarding Class
network-control
[edit class-of-service interfaces interface-name
Forwarding Class
best-effort
best-effort
expedited-forwarding
expedited-forwarding
assured-forwarding
assured-forwarding
network-control
network-control
Copyright © 2017, Juniper Networks, Inc.
Loss Priority
high
PLP
low
high
low
high
low
high
low
high