Juniper ACX1100 Quick Start Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Network Router
  5. ACX1100
  6. Quick start manual

Juniper ACX1100 Quick Start Manual

Universal access router
Hide thumbs Also See for ACX1100:
Table of Contents

Advertisement

Quick Links

See also: Configuration Manual , User Manual
ACX1000 and ACX1100 Universal Access
Routers Quick Start
January 2015
Part Number: 530-062127
Revision 01
Contents
Copyright © 2015, Juniper Networks, Inc.
This document describes how to install the Juniper Networks
Universal Access Routers.
ACX1000 and ACX1100 Routers Quick Start Description . . . . . . . . . . . . . . . . . . . . . 3
Step 1: Prepare the Site for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 2: Install the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tools Required to Install the Router in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Install the Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Install the ACX Series Router in the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Step 3: Ground the ACX1000 and ACX1100 Router . . . . . . . . . . . . . . . . . . . . . . . . . 10
Tools Required to Ground the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connect the Grounding Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Step 4: Connect External Devices and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tools Required to Connect External Devices and Cables . . . . . . . . . . . . . . . . . 12
Connect the ACX Series Router to a Network for Out-of-Band
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connect the ACX Series Router to a Management Console or Auxiliary
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step 5: Connect Power to the ACX Series Router . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connect AC Power to an AC-Powered ACX1100 Router . . . . . . . . . . . . . . . . . 14
Step 6: Perform Initial Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Enter Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Configure User Accounts and Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Configure System Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Commit the Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
®
ACX1000 and ACX1100
1

Advertisement

Table of Contents
loading

Related Manuals for Juniper ACX1100

Summary of Contents for Juniper ACX1100

  • Page 1: Table Of Contents

    Install the ACX Series Router in the Rack ......9 Step 3: Ground the ACX1000 and ACX1100 Router ......10 Tools Required to Ground the Router .
  • Page 2 ACX1000 and ACX1100 Universal Access Routers Quick Start Compliance Statements for NEBS ........22 Compliance Statements for EMC Requirements .

  • Page 3: Acx1000 And Acx1100 Routers Quick Start Description

    The compact routers are one rack unit (U; that is, 1.75 in., or 4.45 cm) tall. Several routers can be stacked in a single floor-to-ceiling rack for increased port density per unit of floor space. The ACX1000 and ACX1100 routers contain twelve Gigabit Ethernet ports, eight of which are RJ-45 ports. The ports labeled COMBO PORTS provide an additional four RJ-45 ports or four Gigabit Ethernet SFP ports.
  • Page 4 10— System ( ) LED 5— T1/E1 ports 11— USB port 6— 12— Grounding terminals Gigabit Ethernet ( ) ports Figure 2: Front Panel of the AC-Powered ACX1100 Router 0/0/5 0/0/6 0/0/7 0/1/2 0/1/3 0/0/4 CONSOLE/AUX 0/0/0 0/0/1 0/0/2 0/0/3...
  • Page 5 ACX1000 and ACX1100 Routers Quick Start Description Figure 3: Front Panel of the DC-Powered ACX1100 Router 0/0/4 0/0/5 0/0/6 0/0/7 0/1/2 0/1/3 CONSOLE/AUX 0/0/0 0/0/1 0/0/2 0/0/3 0/1/0 0/1/1 COMBO PORTS 0/1/0 0/1/1 0/1/2 0/1/3 1— DC terminals 7— Combination Gigabit Ethernet SFP ports 2—...

  • Page 6: Step 1: Prepare The Site For Installation

    ACX1000 and ACX1100 Universal Access Routers Quick Start Step 1: Prepare the Site for Installation Prepare your site for installation by observing the following guidelines: You can install the router in a four-post rack or cabinet or an open-frame rack.
  • Page 7 2.16" (5.5 cm) .75" (2 cm) clearance required clearance required 3" (7.6 cm) for the cables for free airflow 9.4" (24 cm) 19.2" 17.5" Front Rear (48.7 cm) (44.5 cm) 3" (7.6 cm) Front-mounting flange Copyright © 2015, Juniper Networks, Inc.

  • Page 8: Step 2: Install The Router

    ACX1000 and ACX1100 Universal Access Routers Quick Start Step 2: Install the Router Tools Required to Install the Router in a Rack on page 8 Install the Mounting Brackets on page 8 Install the ACX Series Router in the Rack on page 9...

  • Page 9: Install The Acx Series Router In The Rack

    Figure 7: Installing the Front-Mounted Router in the Rack Mounting rack Mounting bracket Copyright © 2015, Juniper Networks, Inc.

  • Page 10: Step 3: Ground The Acx1000 And Acx1100 Router

    ACX1000 and ACX1100 Universal Access Routers Quick Start Step 3: Ground the ACX1000 and ACX1100 Router You must ground the router before connecting to power. Tools Required to Ground the Router on page 10 Connect the Grounding Cable on page 10...
  • Page 11 Dress the grounding cable, and verify that it does not touch or block access to router components, and that it does not drape where people could trip on it. Figure 8: Grounding Points on the ACX Series Router 1— Grounding lug 2— SAE 10-32 screw and washer Copyright © 2015, Juniper Networks, Inc.

  • Page 12: Step 4: Connect External Devices And Cables

    ACX1000 and ACX1100 Universal Access Routers Quick Start Step 4: Connect External Devices and Cables Figure 9: Ethernet Cable Connector Tools Required to Connect External Devices and Cables on page 12 Connect the ACX Series Router to a Network for Out-of-Band Management on page 12...
  • Page 13 CAUTION: Do not let fiber-optic cable hang free from the connector. Do not allow fastened loops of cable to dangle, which stresses the cable at the fastening point. Copyright © 2015, Juniper Networks, Inc.

  • Page 14: Step 5: Connect Power To The Acx Series Router

    You must ground the router before connecting the power cables. Connect AC Power to an AC-Powered ACX1100 Router on page 14 Connect DC Power to a DC-Powered ACX1000 or ACX1100 Router on page 15 Connect AC Power to an AC-Powered ACX1100 Router...

  • Page 15: Connect Dc Power To A Dc-Powered Acx1000 Or Acx1100 Router

    Connect DC Power to a DC-Powered ACX1000 or ACX1100 Router Connect DC Power to a DC-Powered ACX1000 or ACX1100 Router To connect power to the DC-powered router, you need the following tools: Phillips (+) screwdriver, number 2 ESD grounding wrist strap...
  • Page 16 ACX1000 and ACX1100 Universal Access Routers Quick Start b. The cable with very large resistance (indicating an open circuit) to chassis ground is the return cable ( Remove the screws and flat washers from the terminals. Secure each power cable lug to the terminal with the flat washers and screw (see Figure 10 on page 17).
  • Page 17 Connect DC Power to a DC-Powered ACX1000 or ACX1100 Router Figure 10: Connecting DC Power to the Router Copyright © 2015, Juniper Networks, Inc.

  • Page 18: Step 6: Perform Initial Software Configuration

    ACX1000 and ACX1100 Universal Access Routers Quick Start Step 6: Perform Initial Software Configuration This procedure connects the router to the network but does not enable it to forward traffic. For complete information about configuring the router to forward traffic, including examples, see the Junos OS configuration guides.

  • Page 19: Configure System Attributes

    Commit the Configuration (Optional) Display the configuration to verify that it is correct. [edit] root@# show system { host-name host-name; domain-name domain-name; backup-router address; root-authentication { authentication-method (password | public-key); name-server { address; Copyright © 2015, Juniper Networks, Inc.
  • Page 20 ACX1000 and ACX1100 Universal Access Routers Quick Start interfaces { fxp0 { unit 0 { family inet { address address/prefix-length; Commit the configuration to activate it on the router. [edit] root@# commit (Optional) Configure additional properties by adding the necessary configuration statements.

  • Page 21: Safety Warnings

    Before installing the router, read the guidelines for site preparation in the ACX1000 and to make sure that the site meets ACX1100 Universal Access Routers Hardware Guide power, environmental, and clearance requirements for the router. When installing the router, do not use a ramp inclined more than 10 degrees.

  • Page 22: Compliance Statements For Nebs

    The battery return connection is to be treated as an isolated DC return (i.e. DC-I), as defined in GR-1089-CORE. For Juniper systems with AC power supplies, an external surge protective device (SPD) must be used at the AC power source.

  • Page 23: Canada

    Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Copyright © 2015, Juniper Networks, Inc.

  • Page 24: Junos Os Documentation And Release Notes

    7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...

  • Page 25: Opening A Case With Jtac

    Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

This manual is also suitable for:

Acx1000

Table of Contents