Label-Switched-Path-Template (Multicast) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

label-switched-path-template (Multicast)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1586
label-switched-path-template {
(default-template | lsp-template-name);
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
provider-tunnel rsvp-te],
[edit logical-systems logical-system-name routing-instances routing-instance-name
provider-tunnel ingress-replication label-switched-path],
[edit logical-systems logical-system-name routing-instances routing-instance-name
provider-tunnel selective group address source source-address rsvp-te],
[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name
rsvp-te entry-name],
[edit protocols mvpn inter-region-segmented template template-name region region-name
ingress-replication label-switched-path],
[edit protocols mvpn inter-region-segmented template template-name region region-name
rsvpe-te],
[edit protocols mvpn inter-region-template template template-name all-regions
ingress-replication label-switched-path],
[edit protocols mvpn inter-region-template template template-name all-regions rsvp-te],
[edit routing-instances routing-instance-name provider-tunnel ingress-replication
label-switched-path],
[edit routing-instances routing-instance-name provider-tunnel rsvp-te],
[edit routing-instances routing-instance-name provider-tunnel selective group address source
source-address rsvp-te],
[edit routing-options dynamic-tunnels tunnel-name rsvp-te entry-name]
Statement introduced in Junos OS Release 8.5.
Specify the LSP template. An LSP template is used as the basis for other dynamically
generated LSPs. This feature can be used for a number of applications, including
point-to-multipoint LSPs, flooding VPLS traffic, configuring ingress replication for IP
multicast using MBGP MVPNs, and to enable RSVP automatic mesh. There is no default
setting for the
label-switched-path-template
the default-template using the
of your preconfigured LSP template.
default-template —Specify that the default LSP template be used for the dynamically
generated LSPs.
—Specify the name of an LSP to be used as a template for the
lsp-template-name
dynamically generated LSPs.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring Ingress Replication for IP Multicast Using MBGP MVPNs
statement, so you must configure either
option, or you must specify the name
default-template
Copyright © 2017, Juniper Networks, Inc.