Aggregate (Routing) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

aggregate (Routing)

Syntax
Hierarchy Level
Release Information
Description
Options
1420
aggregate {
defaults {
... aggregate-options ...
}
route destination-prefix {
policy policy-name;
... aggregate-options ...
}
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name],
[edit logical-systems logical-system-name routing-options],
[edit logical-systems logical-system-name routing-options
[edit routing-instances routing-instance-name routing-options],
[edit routing-instances routing-instance-name routing-options
[edit routing-options],
[edit routing-options rib routing-table-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Configure aggregate routes.
—Additional information about aggregate routes that is included with
aggregate-options
the route when it is installed in the routing table. Specify zero or more of the following
options in aggregate-options
active — Removes inactive routes from the forwarding table.
(
passive— Retains inactive routes in the forwarding table.
as-path <as-path> <origin (egp | igp | incomplete)> <atomic-aggregate>
<aggregator as-number ip-address>
(brief | full) ;
community [ community-ids ]
discard ;
(metric | metric2 | metric3 | metric4) value <type type>
(preference | preference2 | color | color2) preference <type type>
;
tag metric type number
rib
. Each option is explained separately.
;
;
;
Copyright © 2017, Juniper Networks, Inc.
routing-table-name],
rib routing-table-name],
;