E1-Options (Bits Interfaces Signal Type) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

e1-options (BITS Interfaces Signal Type)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1504
e1-options {
framing (g704 | g704-no-cro4);
}
[edit chassis synchronization interfaces bits
Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Specify options for the E1 signal type for the building-integrated timing supply (BITS)
interface. Valid only if e1 is the
source interfaces interface-name bits signal-type
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
External Clock Synchronization Overview for ACX Series Routers on page 226
Configuring External Clock Synchronization for ACX Series Routers on page 228
Synchronous Ethernet Overview
show chassis synchronization on page 2386
signal-type]
signal-type configured at the [
].
Copyright © 2017, Juniper Networks, Inc.
edit chassis synchronization
.
CLI Explorer