E2E-Transparent - Juniper ACX1000 Configuration Manual

e2e-transparent

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
e2e-transparent;
[edit protocols ptp]
Statement introduced in Junos OS Release 14.1X53-D25 for the QFX Series.
Statement introduced in Junos OS Release 15.1X54-D20 for the ACX5048 and ACX5096
routers.
Configure the end-to-end (E2E) transparent clock for Precision Time Protocol (PTP).
With an end-to-end transparent clock, only the residence time is included in the timestamp
in the packet. Transparent clock functionality is supported on PTP over Ethernet, IPv4,
IPv6, unicast, and multicast. With PTP over Ethernet, one or two VLANs are supported.
Transparent clock functionality is enabled globally and might be required in scenarios in
which the interface on which packets are received and transmitted is unknown.
NOTE: ACX5048 and ACX5096 routers do not support PTP over IPv6 for
transparent clocks.
There are no options.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Transparent Clock Mode for Precision Time Protocol on page 269
Chapter 41: Configuration Statements
1505