Configuring Rfc 2544-Based Benchmarking Tests - Juniper ACX1000 Configuration Manual

Related
Documentation

Configuring RFC 2544-Based Benchmarking Tests

Table 106: Parameters for test-profile Configuration
Parameters
test-type
Copyright © 2017, Juniper Networks, Inc.
RFC 2544 tests can be run with different frame sizes. In ACX Series routers, the
supported frame sizes are 64, 68, 72, 128, 256, 512, 768, 1024, 1280, 1518, 1522, 1600,
1728, 2496, 3584, 4016, 9104, and 9136 bytes.
The minimum mandated duration for RFC 2544 benchmark tests to run is 10 seconds.
The test uses round-trip traffic for performance measurement.
A history of the test results is stored in memory.
The test results can be copied to the local file system or a remote file system, optionally.
NOTE: RFC 2544 test is not supported to compute the performance attributes
of multicast or broadcast traffic streams.
RFC 2544-Based Benchmarking Tests Overview on page 1335
Configuring RFC 2544-Based Benchmarking Tests on page 1341
show services rpm rfc2544-benchmarking on page 3156
show services rpm rfc2544-benchmarking test-id on page 3161
To configure a RFC 2544 benchmark test on an initiator, you must first configure a
and reference the
test-profile
the parameters for the tests to be performed.
To configure a , include the
test-profile
services rpm rfc2544-benchmarking]
initiator.
To configure a test-name , include the
rpm rfc2544-benchmarking]
To configure Ethernet loopback as the test mode on a logical interface, include the
Ethernet-loopback statement at the
level.
NOTE: The test-profile
2544 test.
Table 106 on page 1341 lists the parameters for configuring test-profile at initiator.
Description
RFC 2544 test type (
throughput | latency | frame-loss | back-back-frames
Chapter 37: Configuring RFC 2544-Based Benchmarking Tests
in a unique
test-profile test-name
test-profile profile-name
hierarchy level. Test profile is applicable only for
test-name test-name
hierarchy level.
[edit services rpm rfc2544-benchmarking]
is not required while configuring the reflector for RFC
. The defines
test-name
statement at the
[edit
statement at the [edit services
hierarchy
).
1341