Convert-Clock-Class-To-Quality-Level (Acx Series); Delay-Buffer-Rate - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

convert-clock-class-to-quality-level (ACX Series)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

delay-buffer-rate

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1474
convert-clock-class-to-quality-level;
[edit protocols ptp slave]
Statement introduced in Junos OS Release 12.1.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Configure the destination node to enable it to retrieve Ethernet Synchronization Message
Channel (ESMC) information from the Precision Time Protocol clock class.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
Precision Time Protocol Overview
delay-buffer-rate cps;
[edit class-of-service traffic-control-profiles
Statement introduced in Junos OS Release 12.2 for ACX Series routers.
(ACX Series routers) For ATM IMA pseudowire interfaces, the delay-buffer-rate specifies
the maximum number of ATM cells in the queue.
cps —Delay-buffer rate as an absolute rate in cells per second (cps).
Range: 1000 through 6,400,000,000,000 cps
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
Configuring Shaping on an ATM IMA Pseudowire on page 901
show class-of-service traffic-control-profile
profile-name]
Copyright © 2017, Juniper Networks, Inc.