Juniper ACX1000 Configuration Manual page 1266

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

ACX Series Universal Access Router Configuration Guide
Table 97: jnxSoamDmCurrentStatsTable (continued)
Object
jnxSoamDmCurrentStatsElapsedTime
jnxSoamDmCurrentStatsSuspect
jnxSoamDmCurrentStatsFrameDelayTwoWayMin
jnxSoamDmCurrentStatsFrameDelayTwoWayMax
jnxSoamDmCurrentStatsFrameDelayTwoWayAvg
jnxSoamDmCurrentStatsFrameDelayForwardMin
1208
Object ID
jnxSoamDmCurrentStatsEntry 3
jnxSoamDmCurrentStatsEntry 4
jnxSoamDmCurrentStatsEntry 5
jnxSoamDmCurrentStatsEntry 6
jnxSoamDmCurrentStatsEntry 7
jnxSoamDmCurrentStatsEntry 8
Description
Specifies the length of time for which the
Measurement Interval has been running,
in 0.01 seconds.
Indicates whether the Measurement
Interval has been marked as suspect. The
object is set to false at the start of a
measurement interval. It is set to true
when there is a discontinuity in the
performance measurements during the
Measurement Interval. Conditions for a
discontinuity include, but are not limited
to the following:
1—The local time-of-day clock is adjusted
by at least 10 seconds
2—The conducting of a performance
measurement is halted before the current
Measurement Interval is completed
3—A local test, failure, or reconfiguration
that disrupts service
Contains the minimum two-way frame
delay calculated by this MEP for this
Measurement Interval. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx or dm1DmRx.
Contains the maximum two-way frame
delay calculated by this MEP for this
Measurement Interval. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx or dm1DmRx.
Contains the average two-way frame
delay calculated by this MEP for this
Measurement Interval. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx or dm1DmRx.
Contains the minimum one-way frame
delay in the forward direction calculated
by this MEP for this Measurement
Interval. The value of this object may not
be accurate in the absence of sufficiently
precise clock synchronization. This object
is undefined is jnxSoamDmCfgType is
dm1DmTx.
Copyright © 2017, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents