Juniper ACX1000 Configuration Manual page 964

ACX Series Universal Access Router Configuration Guide
Related
Documentation
906
Results
From configuration mode, confirm your configuration by entering the
the output does not display the intended configuration, repeat the configuration
instructions in this example to correct it.
[edit class-of-service]
user@host# show
traffic-control-profiles {
profile-1 {
atm-service rtvbr;
peak-rate 5k;
sustained-rate 3k;
max-burst-size 400;
}
profile-2 {
atm-service cbr;
peak-rate 1k;
}
}
interfaces {
at-0/0/16 {
unit 101 {
output-traffic-control-profile profile-1;
}
}
}
traceoptions {
file cos size 1000000000;
flag all;
}
[edit interfaces]
user@host# show
at-0/0/16 {
per-unit-scheduler;
}
}
After you have completed the configuration, enter the
configuration mode.
Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
Configuring Shaping on an ATM IMA Pseudowire on page 901
Example: Configuring Fixed Classification on an ATM IMA Pseudowire on page 898
Example: Configuring Policing on an ATM IMA Pseudowire on page 915
command. If
show
command from
commit
Copyright © 2017, Juniper Networks, Inc.