Juniper ACX1000 Configuration Manual page 744

ACX Series Universal Access Router Configuration Guide
686
Flag
bootstrap
general
graft
hello
join
mdt
normal
nsr-synchronization
packets
policy
prune
register
route
rp
state
task
timer
In the following example, tracing is enabled for all routing protocol packets. Then tracing
is narrowed to focus only on PIM packets of a particular type.
To configure tracing operations for PIM:
(Optional) Configure tracing at the [routing-options hierarchy level to trace all protocol
1.
packets.
[edit routing-options traceoptions]
Description
Trace bootstrap messages, which are sent periodically
by the PIM domain's bootstrap router and are forwarded,
hop by hop, to all routers in that domain.
Trace general events.
Trace graft and graft acknowledgment messages.
Trace hello packets, which are sent so that neighboring
routers can discover one another.
Trace join messages, which are sent to join a branch onto
the multicast distribution tree.
Trace messages related to multicast data tunnels.
Trace normal events.
Trace nonstop routing synchronization events
Trace all PIM packets.
Trace poison-route-reverse packets.
Trace prune messages, which are sent to prune a branch
off the multicast distribution tree.
Trace register and register-stop messages. Register
messages are sent to the RP when a multicast source first
starts sending to a group.
Trace routing information.
Trace candidate RP advertisements.
Trace state transitions.
Trace task processing.
Trace timer processing.
Copyright © 2017, Juniper Networks, Inc.