Clock-Client (Master Clock) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

clock-client (Master Clock)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1464
clock-client ip-address local-ip-address local-ip-address {
manual;
}
[edit protocols ptp master interface
Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Configure the IP address or subnet of the remote PTP host and the local PTP master
interface. This statement enables you to specify the following information:
The exact IP address of a PTP host
A subnet mask instead of the exact IP address of each host. The ACX Series router
acting as the master boundary clock processes unicast negotiation requests from any
host—within the subnet—which sends unicast negotiation requests. The maximum
number of clock clients is 512.
NOTE: You can configure the maximum number of clients (512 ) in the
following combination:
Automatic clients 256.
Manual and secure clients 256—Any combination of manual and secure
clients is allowed as long as the combined total amounts to 256.
ip-address—IP address or subnet of the remote PTP host.
local-ip-address—IP address of the local PTP master interface.
The remaining statement is explained separately. See
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
IEEE 1588v2 PTP Boundary Clock Overview on page 234
Configuring Precision Time Protocol Clocking on page 243
Configuring a PTP Master Boundary Clock on page 244
Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
Example: Configuring a PTP Boundary Clock on page 248
interface-name unicast-mode]
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.
.