Managed Objects For Jnxsoamdmhistorystatstable - Juniper ACX1000 Configuration Manual

Table 97: jnxSoamDmCurrentStatsTable (continued)
Object
jnxSoamDmCurrentStatsIfdvTwoWayAvg
jnxSoamDmCurrentStatsSoamPdusSent
jnxSoamDmCurrentStatsSoamPdusReceived

Managed Objects for jnxSoamDmHistoryStatsTable

Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
Object ID
jnxSoamDmCurrentStatsEntry 22
jnxSoamDmCurrentStatsEntry 23
jnxSoamDmCurrentStatsEntry 24
The
jnxSoamDmHistoryStatsTable
contains the jnxSoamDmHistoryStatsEntry
(ETH-DM) historical statistical details. Each
identifier is
{jnxSoamDmHistoryStatsTable 1}
table.
The
jnxSoamDmHistoryStatsTable
in a SOAM Loss Measurement session. Rows of this table object are created automatically
by the SNMP Agent when the Loss Measurement session is running and a Measurement
Interval is completed. Each row in the table represents the history statistics for a Loss
Measurement session Measurement Interval for the defined MEP. This table uses five
indices. The first three indices are the indices of the Maintenance Domain, MaNet, and
MEP tables. The fourth index is the specific LM session on the selected MEP. The fifth
index index the specific Measurement Interval.
At least 32 completed Measurement Intervals are to be supported. 96 completed
Measurement Intervals are recommended to be supported. If there are at least 32 rows
in the table and a new Measurement Interval completes and a new row is to be added
to the table, the oldest completed Measurement Interval may be deleted (row deletion).
If the measurement interval is other than 15 minutes then a minimum of 8 hours of
completed Measurement Intervals are to be supported and 24 hours are recommended
to be supported.
Description
Contains the average two-way
inter-frame delay interval calculated by
this MEP for this Measurement Interval.
The value of this object is undefined when
jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
Contains the count of the number of
SOAM PDUs sent during this
Measurement Interval. This object applies
when jnxSoamDmCfgType is dmDmm or
dm1DmTx and is undefined if
jnxSoamDmCfgType is dm1DmRx. It
indicates the number of DMM or 1DM
SOAM frames transmitted.
Contains the count of the number of
SOAM PDUs received in this
Measurement Interval. This object
indicates the number of DMR and 1DM
SOAM frames received. This object
applies when jnxSoamDmCfgType is
dmDmm or dm1DmRx and is undefined
if jnxSoamDmCfgTypeis dm1DmTx.
, whose object identifier is
that signifies the Ethernet delay measurement
jnxSoamDmHistoryStatsEntry
, contains the objects listed in the following
contains the results for history Measurement Intervals
{jnxSoamPmLmObjects 4}
, whose object
1211
,