Input-Relay (Alarm Relay Output Port) - Juniper ACX1000 Configuration Manual

input-relay (Alarm Relay Output Port)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
input-relay input-relay;
[edit chassis alarm relay output port
Statement introduced in Junos OS Release 12.3.
Configure the output relay alarm port to respond when the configured input relay port is
triggered.
The remaining statements are explained separately. See
—Input port number configured at the [
input-relay
] hierarchy level. Input relay alarm port numbers are 0 through 3.
port-number
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
User-Defined Alarm Relay Overview on page 158
show chassis craft-interface on page 1865
show chassis alarms on page 1845
Chapter 41: Configuration Statements
port-number ]
CLI Explorer
edit chassis alarm relay input port
.
1567