Destination-Networks - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

destination-networks

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1484
destination-networks prefix;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options dynamic-tunnels tunnel-name],
[edit logical-systems logical-system-name
rsvp-te entry],
[edit logical-systems logical-system-name
[edit routing-instances routing-instance-name
[edit routing-instances routing-instance-name
rsvp-te entry],
[edit routing-options dynamic-tunnels tunnel-name],
[edit routing-options dynamic-tunnels tunnel-name rsvp-te entry]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Specify the IPv4 prefix range for the destination network. Only tunnels within the specified
IPv4 prefix range can be created.
prefix —Destination prefix of the network.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring GRE Tunnels for Layer 3 VPNs
Configuring Dynamic Tunnels
Configuring RSVP Automatic Mesh
routing-options dynamic-tunnels tunnel-name
routing-options dynamic-tunnels tunnel-name],
routing-options dynamic-tunnels tunnel-name],
routing-options dynamic-tunnels tunnel-name
Copyright © 2017, Juniper Networks, Inc.