Juniper ACX1000 Configuration Manual page 1217

Table 82: Features Using TCAM Resource
TCAM Apps/TCAM Users
bd-dtag-validate
bd-tpid-swap
cfm-bd-filter
cfm-filter
cfm-vpls-filter
cfm-vpls-ifl-filter
cos-fc
fw-ccc-in
fw-family-out
fw-fbf
fw-fbf-inet6
fw-ifl-in
fw-ifl-out
fw-inet-ftf
fw-inet6-ftf
fw-inet-in
fw-inet-rpf
fw-inet6-in
fw-inet6-family-out
fw-inet6-rpf
Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
Feature/Functionality
Bridge domain dual-tagged validate
NOTE: This feature is not supported on ACX5048 and ACX5096
routers.
Bridge domain vlan-map with swap tpid operation
Connectivity fault management implicit bridge-domain filters
Connectivity fault management implicit filters
Connectivity fault management implicit vpls filters
NOTE: This feature is supported only on ACX5048 and ACX5096
routers.
Connectivity fault management implicit vpls logical interface filters
NOTE: This feature is supported only on ACX5048 and ACX5096
routers.
Logical interface level fixed classifier
Circuit cross-connect family ingress firewall
Family level egress firewall
Firewall filter-based forwarding
Firewall filter-based forwarding for inet6 family
Logical interface level ingress firewall
Logical interface level egress firewall
Inet family ingress firewall on a forwarding-table
Inet6 family ingress firewall on a forwarding-table
Inet family ingress firewall
Inet family ingress firewall on RPF fail check
Inet6 family ingress firewall
Inet6 Family level egress firewall
Inet6 family ingress firewall on a RPF fail check
TCAM Stage
Egress
Egress
Ingress
Ingress
Ingress
Ingress
Pre-ingress
Ingress
Egress
Pre-ingress
Pre-ingress
Ingress
Egress
Ingress
Ingress
Ingress
Ingress
Ingress
Egress
Ingress
1159