Level; Clearing Eth-Slm Statistics And Frame Counts - Juniper ACX1000 Configuration Manual

Meaning
Displaying ETH-SLM Frame Counts for MEPs by Interface or Domain Level
Purpose
Action
Meaning

Clearing ETH-SLM Statistics and Frame Counts

Purpose
Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
user@host> show oam ethernet connectivity-fault-management mep-database
maintenance-domain ma3 maintenance-association ma3 remote-mep 302
The output displays ETH-SLM frame counts for MEPs within a particular maintenance
domain, or for a specific local or remote MEP. For details about the output of this
command and the descriptions of the output fields, see
connectivity-fault-management mep-database
Display on-demand ETH-SLM frame counts for CFM maintenance association end points
(MEPs).
By default, the show oam ethernet connectivity-fault-management interfaces
displays CFM database information for MEPs attached to CFM-enabled Ethernet
interfaces on the router or at a maintenance domain level. For Ethernet interfaces that
support ETH-SLM, any frame counts are also displayed when you specify the
command option.
extensive
NOTE: At the router attached to the initiator MEP, you can only display the
ETH-SLM frame counts and not the MEP database details.
To display CFM database information (including ETH-SLM frame counts) for all MEPs
attached to CFM-enabled Ethernet interfaces on the router:
user@host> show oam ethernet connectivity-fault-management interfaces detail
To display CFM database information (including ETH-SLM frame counts) only for the
MEPs attached to CFM-enabled router interface
user@host> show oam ethernet connectivity-fault-management interfaces ge-5/2/9.0 detail
To display CFM database information (including ETH-SLM frame counts) only for
MEPs enclosed within CFM maintenance domains at level
user@host> show oam ethernet connectivity-fault-management interfaces level 6 detail
The output displays ETH-SLM frame counts for MEPs for the specified interface. For
details about the output of this command and the descriptions of the output fields, see
show oam ethernet connectivity-fault-management interfaces
Clear the on-demand ETH-SLM statistics and ETH-SLM frame counts.
show oam ethernet
.
ge-5/2/9.0 :
6 :
.
command
or
detail
1151