Juniper ACX1000 Configuration Manual page 1470

ACX Series Universal Access Router Configuration Guide
1412
metric (Aggregate, Generated, or Static Route) on page 1612
message-rate-limit on page 1613
min-announce-interval on page 1614
min-delay-response-interval on page 1615
min-sync-interval on page 1616
minimum-links on page 1617
mld on page 1618
mode (Chassis Alarm Relay Input and Output) on page 1619
mode (Interfaces) on page 1620
mode (RFC 2544 Benchmarking) on page 1621
mrru on page 1622
mtu on page 1623
multicast (Virtual Tunnel in Routing Instances) on page 1627
multicast-mode (PTP Master and Slave Interfaces) on page 1628
multilink-max-classes on page 1629
multilink-class on page 1630
multipath (Routing Options) on page 1631
native-vlan-id on page 1632
network-option on page 1634
no-bfd-triggered-local-repair on page 1635
no-mac-learning on page 1636
no-local-switching on page 1637
no-local-switching (VPLS) on page 1638
no-partition on page 1639
no-root-port on page 1640
no-vrf-advertise on page 1641
no-vrf-propagate-ttl on page 1642
oam-liveness on page 1643
oam-period on page 1644
options (Routing Options) on page 1645
output (Chassis Alarm Relay) on page 1646
outer-tag-protocol-id (RFC 2544 Benchmarking) on page 1646
overrides (DHCP Relay Agent) for ACX on page 1647
ovlan-cfi (RFC 2544 Benchmarking) on page 1648
ovlan-id (RFC 2544 Benchmarking) on page 1648
packet-action on page 1649
ovlan-priority (RFC 2544 Benchmarking) on page 1652
Copyright © 2017, Juniper Networks, Inc.