ACX Series Universal Access Router Configuration Guide
Related
Documentation
1400
user@host# set sample-rate number
(Optional) You can also configure the polling interval and sample rate at the interface
5.
level:
[edit protocols sflow]
user@host# set interfaces interface-name polling-interval seconds sample-rate number
NOTE:
The interface-level configuration overrides the global configuration
for the specified interface.
You can use the following CLI commands to verify and troubleshoot the configurations:
show sflow—Display sFlow configuration information.
show sflow interface—Display the interfaces on which sFlow is enabled and the sampling
parameters for the interface.
show sflow collector—Display a list of configured sFlow collectors and their properties.
clear sflow collector statistics—Clear the sample counters for all sFlow collectors.
Overview of sFlow Technology on page 1397
Copyright © 2017, Juniper Networks, Inc.