Delete-Upon-Commit (Acx Series) - Juniper ACX1000 Configuration Manual

delete-upon-commit (ACX Series)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
delete-upon-commit {
[edit system autoinstallation]
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Specify that during the subsequent commit operation of configuration settings (after
the autoinstallation process successfully retrieves, installs, and commits the
configuration), the autoinstallation configuration parameters are removed from the
router. Removal of the autoinstallation parameters and statements from the committed
configuration on the router ensures that the router does not attempt to perform an
autoinstallation process when it is powered on the next time. Although you can optionally
specify the interfaces to perform autoinstallation or configuration servers from which
the files are to be downloaded, you must include the delete-upon-commit statement to
prevent the router from entering a recursive loop and repeatedly performing an
autoinstallation every time it is powered on.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
ACX Series Autoinstallation Overview on page 75
Before You Begin Autoinstallation on an ACX Series Universal Access Router on page 77
configuration-servers
idle-timeout
Chapter 41: Configuration Statements
1475