Firewall Filter Support On Loopback Interface - Juniper ACX1000 Configuration Manual

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

ACX Series Universal Access Router Configuration Guide
Table 81: Firewall Filter Match Conditions for VPLS Traffic (continued)
Match Condition
user-vlan-id-except number
vlan-ether-type value
vlan-ether-type-except value
Release History Table
Related
Documentation

Firewall Filter Support on Loopback Interface

1080
Description
(MX Series routers and EX Series switches only) Do not match on the first VLAN identifier that
is part of the payload.
VLAN Ethernet type field of a VPLS packet.
Do not match on the VLAN Ethernet type field of a VPLS packet.
Release
Description
14.2
Starting in Junos OS 14.2, flexible offset filters are supported in firewall
hierarchy configurations.
14.2
Starting in Junos OS 14.2, firewall family bridge IPv6 match criteria is
supported on MX Series and EX9200 switches.
Guidelines for Configuring Firewall Filters on page 1044
Firewall Filter Terminating Actions
Firewall Filter Nonterminating Actions
A loopback interface is a gateway for all the control traffic that enters the Routing Engine
of the router. If you want to monitor this control traffic, you must configure a firewall filter
on the loopback interface (lo0). Loopback firewall filters are applied only to packets that
are sent to the Routing Engine CPU for further processing. Therefore, you can apply a
firewall filter in the ingress and egress directions on the loopback interface. Loopack
interfaces on ACX Routers support both inet and inet6 family filters.
NOTE:
On ACX, the filter for loopback interface can be applied only for
interface-specific instances of the firewall filter.
For standard firewall filter match conditions, see
Conditions for IPv4 Traffic on ACX Series Routers" on page
The firewall filter on loopback interfaces handles only the following exception packets
in ingress direction:
TTL exception packets
Multicast packets having 224.0.0.x as the destination IP address
"Standard Firewall Filter Match
1054.
Copyright © 2017, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents