Juniper ACX1000 Configuration Manual page 1290

ACX Series Universal Access Router Configuration Guide
Table 102: jjnxSoamPmNotifications Table (continued)
Object
1232
Object ID Description
DM crossing entry for a type of
bPmThresholdSetClearAlarm for the
Measurement Interval.
5. The previous measured value did not
exceed the value configured in the
jnxSoamLmThresholdCfgTable for a
LM crossing entry or
jnxSoamDmThresholdCfgTable for a
DM crossing entry for a type of
bPmThresholdSetClearAlarm.
For a clearAlarm, the following five
conditions must be met:
1. Measurement of the parameter is
enabled using
jnxSoamLmCfgMeasurementEnable
for a LM crossing or
jnxSoamDmCfgMeasurementEnable
for a DM crossing.
2. The parameter threshold is configured
in the jnxSoamLmThresholdCfgTable
or jnxSoamDmThresholdCfgTable.
3. The threshold crossing type of
bPmThresholdSetClearAlarm is
enabled.
4. The measured value of the parameter
did not exceed the value configured
in the jnxSoamLmThresholdCfgTable
for a LM crossing entry or
jnxSoamDmThresholdCfgTable for a
DM crossing entry for a type of
bPmThresholdSetClearAlarm for the
Measurement Interval.
5. The previous measured value did
exceed the value configured in the
jnxSoamLmThresholdCfgTable for a
LM crossing entry or
jnxSoamDmThresholdCfgTable for a
DM crossing entry for a type of
bPmThresholdSetClearAlarm.
Copyright © 2017, Juniper Networks, Inc.