Bridge-Domains (Acx Series) - Juniper ACX1000 Configuration Manual

bridge-domains (ACX Series)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
bridge-domains {
bridge-domain-name {
bridge-options {
...bridge-options-configuration...
}
domain-type bridge;
interface interface-name;
no-irb-layer-2-copy;
routing-interface routing-interface-name;
vlan-id (all | none | number);
vlan-id-list [ vlan-id-numbers ];
vlan-tags outer number inner number;
bridge-options {
interface interface-name {
static-mac mac-address;
}
interface-mac-limit limit;
mac-statistics;
mac-table-size limit;
no-mac-learning;
}
}
}
[edit],
[edit logical-systems logical-system-name routing-instances routing-instance-name],
[edit routing-instances routing-instance-name]
Statement introduced in Junos OS Release 12.3X52 for ACX Series routers.
Configure a domain that includes a set of logical ports that share the same flooding or
broadcast characteristics in order to perform Layer 2 bridging.
bridge-domain-name —Name of the bridge domain.
NOTE: You cannot use the slash (/) character as part of the bridge domain
name. If you do, the configuration will not commit.
The remaining statements are explained separately. See
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Chapter 41: Configuration Statements
.
CLI Explorer
1455