Juniper ACX1000 Configuration Manual page 1650

ACX Series Universal Access Router Configuration Guide
Options
Required Privilege
Level
Related
Documentation
1592
command ensures that the MAC entries are re-learned and in synchronization
between both the peers.
—Specify the maximum number of addresses in the MAC address table.
limit
Range: 16 through 1,048,575 MAC addresses
Default: 5120 MAC addressesThere is no default MAC address limit for the
statement at the [edit switch-options]
that can be learned is only limited by the platform, 65,535 MAC addresses for EX
Series switches and 1,048,575 MAC addresses for other devices.
The remaining statement is explained separately. See
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Layer 2 Learning and Forwarding for Bridge Domains Overview
Layer 2 Learning and Forwarding for VLANs Overview
Layer 2 Learning and Forwarding for Bridge Domains Functioning as Switches with Layer
2 Trunk Ports
Layer 2 Learning and Forwarding for VLANs Acting as a Switch for a Layer 2 Trunk Port
hierarchy level. The number of MAC addresses
.
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.
mac-table-size