Juniper ACX1000 Configuration Manual page 963

Step-by-Step
Procedure
Copyright © 2017, Juniper Networks, Inc.
Specify the ATM constant bit rate
8.
[edit class-of-service traffic-control-profiles profile-2]
user@host# set atm-service cbr
Define the largest number of cells per second that the shaper processes before it
9.
drops packets:
[edit class-of-service traffic-control-profiles profile-2]
user@host# set peak-rate 1k
Define the largest number of cells per second that the shaper processes before it
10.
drops packets:
[edit class-of-service traffic-control-profiles profile-2]
user@host# set peak-rate 1k
Apply the first shaping traffic profile to the ATM IMA pseudowire logical interface:
11.
[edit class-of-service]
user@host# edit interfaces at-0/0/16 unit 101 output-traffic-control-profile profile-1
Configure the per-unit scheduler:
12.
[edit interfaces at-0/0/16]
user@host# set interfaces at-0/0/16 per-unit-scheduler
Configuring Tracing Operations
To define tracing operations for the class-of-service (CoS) configuration:
Configure class-of-service (CoS) tracing options:
1.
[edit]
user@host# edit class of service traceoptions
Create the file to receive the tracing operation output:
2.
[edit class-of-service traceoptions]
user@host# set file cos
Define the maximum size of the file:
3.
[edit class-of-service traceoptions]
user@host# set file size 1000000000
Specify the tracing operation to perform:
4.
[edit class-of-service traceoptions]
user@host# set flag all
Chapter 27: Configuring Class of Service
service traffic category:
cbr
905