Standard Snmp Mibs Supported By Junos Os - Juniper ACX1000 Configuration Manual

Related
Documentation

Standard SNMP MIBs Supported by Junos OS

Table 60: Standard MIBs supported by Junos OS
Standard MIB
IEEE 802.1ab section 12.1, Link Layer
Discovery Protocol (LLDP) MIB
IEEE, 802.3ad, Aggregation of Multiple
Link Segments
Copyright © 2017, Juniper Networks, Inc.
}
Controlling Network Access Using Traffic Policing Overview on page 908
ACX Series Universal Access Router Overview on page 3
ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping on page 30
ACX2000 and ACX2100 Routers Hardware and CLI Terminology Mapping on page 33
Junos OS supports the Standard MIBs listed in
NOTE: For details on SNMP MIB support on EX4600 switches, QFX Series
switches, and QFabric systems, see SNMP MIBs Support.
Exceptions
EX Series implementation of LLDP MIB
supports both IPv4 and IPv6
configuration.
Supported tables and objects:
dot3adAggPortTable
dot3adAggPortListTable
dot3adAggTable
dot3adAggPortStatsTable
NOTE: EX Series switches do not
support the
dot3adAggPortStatsTable
dot3adAggPortDebugTable
dot3adAggPortDebugRxState
dot3adAggPortDebugMuxState
dot3adAggPortDebugActorSync TransitionCount
dot3adAggPortDebugPartnerSync T ransitionCount
dot3adAggPortDebugActorChangeCount
and
dot3adAggPortDebugPartnerChangeCount
NOTE: EX Series switches do not
support the
dot3adAggPortDebugTable
dot3adTablesLastChanged
Chapter 29: Understanding Network Management
Table 60 on page
Platforms
EX Series and MX Series
EX Series, M Series, MX Series, PTX
Series, SRX Series, T Series, and vSRX
,
,
, and
and
dot3adAggPortTable
.
(only
,
,
,
,
,
)
.
967.
967