Configuring A Test Name For An Rfc 2544-Based Benchmarking Test - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

Configuring a Test Name for an RFC 2544-Based Benchmarking Test

1348
[edit services rpm rfc2544-benchmarking profiles test-profile profile1]
user@host# set test-type latency
To configure a frame-loss test, use the
statement.
[edit services rpm rfc2544-benchmarking profiles test-profile profile1]
user@host# set test-type frame-loss
To configure a back-to-back frames test, use the
statement.
test-type
[edit services rpm rfc2544-benchmarking profiles test-profile profile1]
user@host# set test-type back-back-frames
You can configure a test name by including the
[edit services rpm rfc2544-benchmarking]
To configure a test name and define its attributes for initiator:
In configuration mode, go to the
1.
[edit]
user@host# edit services
Configure an RPM service instance.
2.
[edit services]
user@host# edit rpm
Configure an RFC 2544-based benchmarking test for the RPM instance.
3.
[edit services rpm]
user@host# edit rfc2544-benchmarking
Define a name for the test—for example, test1. The test name identifier can be up to
4.
32 characters in length.
[edit services rpm rfc2544-benchmarking]
user@host# edit tests test-name test1
Configure the destination IPv4 address for the test packets. This parameter is required
5.
only if you configure an IPv4 family inet. This option is not required if you specify circuit
cross-connect (CCC) as the family. If you do not configure the destination IPv4 address,
the default value of 192.168.1.20 is used.
[edit services rpm rfc2544-benchmarking tests test-name test1]
user@host# set destination-ipv4-address address
Specify the source MAC address used in generated test frames. This parameter is
6.
effective for a CCC family and it is not applicable for an
parameter for an family, a commit error occurs when you commit the configuration.
inet
option with the
frame-loss
back-back-frames
test-name test-name
hierarchy level.
[edit services] hierarchy level.
inet
Copyright © 2017, Juniper Networks, Inc.
test-type
option with the
statement at the
family. If you specify this