Alarm (Chassis) - Juniper ACX1000 Configuration Manual

alarm (chassis)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
alarm {
interface-type {
alarm-name (ignore |red | yellow);
}
}
[edit chassis],
[edit chassis interconnect-device name],
[edit chassis node-group name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Statement introduced in Junos OS Release 12.2 for the ACX Series.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Configure the chassis alarms and whether they trigger a red or yellow alarm, or whether
they are ignored. Red alarm conditions light the
craft interface or the switch's LCD screen and trigger an audible alarm if one is connected
to the contact on the craft interface or LCD screen. Yellow alarm conditions light the
YELLOW ALARM LED on either the router's craft interface or the switch's LCD screen and
trigger an audible alarm if one is connected to the craft interface or LCD screen.
To configure more than one alarm, include multiple
—Alarm condition. For a list of conditions, see System-Wide Alarms and Alarms
alarm-name
for Each Interface Type.
—The specified alarm condition does not set off any alarm.
ignore
interface-type —Type of interface on which you are configuring the alarm:
, or .
sonet t3
—The specified alarm condition sets off a red alarm.
red
—The specified alarm condition sets off a yellow alarm.
yellow
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Understanding Alarms
Chassis Conditions That Trigger Alarms
Chassis Alarm Messages on a QFX3500 Device
Interface Alarm Messages
Chapter 41: Configuration Statements
LED on either the router's
RED ALARM
lines.
alarm-name
atm , ethernet ,
1427