Martians - Juniper ACX1000 Configuration Manual

martians

Syntax
Hierarchy Level
Release Information
Description
Options
Copyright © 2017, Juniper Networks, Inc.
martians {
destination-prefix match-type <allow>;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name],
[edit logical-systems logical-system-name routing-options],
[edit logical-systems logical-system-name routing-options
[edit routing-instances routing-instance-name routing-options],
[edit routing-instances routing-instance-name routing-options
[edit routing-options],
[edit routing-options rib routing-table-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Configure martian addresses.
allow —(Optional) Explicitly allow a subset of a range of addresses that has been
disallowed. The
allow
destination-prefix —Destination route you are configuring:
destination-prefix/prefix-length
address, and
prefix-length
default —Default route to use when routing packets do not match a network or host in
the routing table. This is equivalent to specifying the IP address
—Criteria that the destination must match:
match-type
exact —Exactly match the route's mask length.
—The route's mask length is greater than the specified mask length.
longer
—The route's mask length is equal to or greater than the specified mask length.
orlonger
through destination-prefix
second prefix for the number of bits in the route, and the number of bits in the route is
less than or equal to the number of bits in the second prefix.
upto prefix-length —The route's mask length falls between the two destination prefix
lengths, inclusive.
option is the only supported action.
— is the network portion of the IP
destination-prefix
is the destination prefix length.
—The route matches the first prefix, the route matches the
Chapter 41: Configuration Statements
rib routing-table-name],
rib routing-table-name],
.
0.0.0.0/0
1597