Autoinstallation - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

autoinstallation

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1442
autoinstallation {
configuration-servers {
url;
}
interfaces {
interface-name {
bootp;
rarp;
}
}
}
[edit system]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Download a configuration file automatically from an FTP, Hypertext Transfer Protocol
(HTTP), or Trivial FTP (TFTP) server. When you power on a router or switch configured
for autoinstallation, it requests an IP address from a Dynamic Host Configuration Protocol
(DHCP) server. Once the router or switch has an address, it sends a request to a
configuration server and downloads and installs a configuration.
The remaining statements are explained separately. See
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
ACX Series Autoinstallation Overview on page 75
Before You Begin Autoinstallation on an ACX Series Universal Access Router on page 77
Autoinstallation Configuration of ACX Series Universal Access Routers on page 78
USB Autoinstallation on ACX Series Routers on page 80
Verifying Autoinstallation on ACX Series Universal Access Routers on page 79
show system autoinstallation status on page 3178
Upgrading Software by Using Automatic Software Download
configuration-servers
idle-timeout
.
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.