Juniper ACX1000 Configuration Manual page 705

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Copyright © 2017, Juniper Networks, Inc.
RD -- remote site signaled down
XX -- unknown
Legend for interface status
Up -- operational
Dn -- down
Neighbor: 192.168.0.101
Interface
ge-1/3/2.600(vc 1)
Remote PE: 192.168.0.101, Negotiated control-word: Yes (Null)
Incoming label: 299776, Outgoing label: 299776
Negotiated PW status TLV: Yes
local PW status code: 0x00000000, Neighbor PW status code: 0x00000000
Local interface: ge-1/3/2.600, Status: Up, Encapsulation: VLAN
Connection History:
Jan 24 11:00:26 2013
Jan 24 11:00:26 2013
Jan 24 11:00:26 2013
Jan 24 11:00:26 2013
Jan 24 11:00:26 2013
Neighbor: 192.168.0.102
Interface
ge-1/3/2.600(vc 2)
Remote PE: 192.168.0.102, Negotiated control-word: Yes (Null)
Incoming label: 299792, Outgoing label: 299776
Negotiated PW status TLV: Yes
local PW status code: 0x00000020, Neighbor PW status code: 0x00000000
Local interface: ge-1/3/2.600, Status: Up, Encapsulation: VLAN
user@PE1> show l2circuit connections extensive
Layer-2 Circuit Connections:
Legend for connection status (St)
EI -- encapsulation invalid
MM -- mtu mismatch
EM -- encapsulation mismatch
CM -- control-word mismatch
VM -- vlan id mismatch
OL -- no outgoing label
NC -- intf encaps not CCC/TCC
BK -- Backup Connection
CB -- rcvd cell-bundle size bad
LD -- local site signaled down
RD -- remote site signaled down
XX -- unknown
Legend for interface status
Up -- operational
Dn -- down
Neighbor: 192.168.0.100
Interface
lt-1/2/0.600(vc 1)
Remote PE: 192.168.0.100, Negotiated control-word: Yes (Null)
Incoming label: 299776, Outgoing label: 299776
Negotiated PW status TLV: Yes
local PW status code: 0x00000000, Neighbor PW status code: 0x00000000
Local interface: lt-1/2/0.600, Status: Up, Encapsulation: VLAN
Connection History:
Jan 24 11:06:36 2013
Jan 24 11:06:36 2013
Jan 24 11:06:36 2013
Chapter 20: Configuring MPLS and Pseudowires
HS -- Hot-standby Connection
Type
St
Time last up
rmt
Up
Jan 24 11:00:26 2013
status update timer
PE route changed
Out lbl Update
In lbl Update
loc intf up
Type
St
Time last up
rmt
HS
-----
NP -- interface h/w not present
Dn -- down
VC-Dn -- Virtual circuit Down
Up -- operational
CF -- Call admission control failure
IB -- TDM incompatible bitrate
TM -- TDM misconfiguration
ST -- Standby Connection
SP -- Static Pseudowire
RS -- remote site standby
HS -- Hot-standby Connection
Type
St
Time last up
rmt
Up
Jan 24 11:06:36 2013
status update timer
PE route changed
Out lbl Update
# Up trans
1
299776
299776
ge-1/3/2.600
# Up trans
----
# Up trans
1
299776
647

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents