In-Service (Rfc2544 Benchmarking) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

in-service (RFC2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1568
in-service;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Statement introduced in Junos OS Release 14.2 for MX104 3D Universal Edge routers.
Runs the test in the in-service
the data traffic sent to and from the UNI port under test on the service are not interrupted.
Control protocol packets and control protocol peering are not interrupted.
If this mode is not configured, the test runs in the default
out-of-service mode, while the test is running, all the data traffic sent to and from the
UNI port under test on the service is interrupted. Control protocol peering is not interrupted
whereas control protocol packets such as CFM sessions are interrupted.
The default service mode for the reflecting egress interface for an E-LAN service is
mode.
out-of-service
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
rfc2544-benchmarking on page 1698
RFC2544-Based Benchmarking Tests Overview
Configuring an RFC 2544-Based Benchmarking Test
mode. In this mode, while the test is running, the rest of
Copyright © 2017, Juniper Networks, Inc.
test-name]
mode. In the
out-of-service