Disable-Signature-Check (Rfc 2544 Benchmarking) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

disable-signature-check (RFC 2544 Benchmarking)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1488
disable-signature-check;
[edit services rpm rfc2544-benchmarkingtests test-name
Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Statement introduced in Junos OS Release 15.1 for MX104 3D Universal Edge routers.
Disable signature verification on the received test frames. This statement is valid only if
you configure the test mode to be a reflector. The configuration is useful when the test
traffic is generated using a third-party vendor tool, instead of an ACX Series router.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
RFC2544-Based Benchmarking Tests Overview
Supported RFC2544-Based Benchmarking Statements on MX104 Routers
Configuring an RFC 2544-Based Benchmarking Test
test-name]
Copyright © 2017, Juniper Networks, Inc.