Configuring The Automatic Bandwidth Allocation Interval - Juniper ACX1000 Configuration Manual

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Copyright © 2017, Juniper Networks, Inc.
For example:
user@host> show protocols mpls
label-switched-path primary-path {
to 192.168.0.1;
ldp-tunneling;
optimize-timer 3571;
least-fill;
link-protection;
adaptive;
auto-bandwidth {
adjust-interval 7177;
adjust-threshold 5;
minimum-bandwidth 1m;
maximum-bandwidth 2500000000;
adjust-threshold-overflow-limit 2;
resignal-minimum-bandwidth;
}
primary primary-path;
secondary secondary-path {
bandwidth 0;
no-cspf;
priority 0 0;
}
}
The statements configured at the
label-switched-path-name auto-bandwidth]
the following sections:
Configuring the Automatic Bandwidth Allocation Interval on page 613
Configuring the Maximum and Minimum Bounds of the LSP's Bandwidth on page 614
Configuring the Automatic Bandwidth Adjustment Threshold on page 614
Configuring a Limit on Bandwidth Overflow and Underflow Samples on page 615
Configuring Passive Bandwidth Utilization Monitoring on page 617

Configuring the Automatic Bandwidth Allocation Interval

At the end of the automatic bandwidth allocation interval, the automatic bandwidth
computation and new path setup process is triggered.
NOTE:
To prevent unnecessary resignaling of LSPs, it is best to configure an
LSP adjustment interval that is at least three times longer than the MPLS
automatic bandwidth statistics interval. For example, if you configure a value
of 30 seconds for the MPLS automatic bandwidth statistics interval (
statement at the
configure a value of at least 90 seconds for the LSP adjustment interval
(
adjust-interval
label-switched-path-name auto-bandwidth]
"Configuring Reporting of Automatic Bandwidth Allocation Statistics for
LSPs" on page
619.
Chapter 20: Configuring MPLS and Pseudowires
[edit protocols mpls label-switched-path
hierarchy level are optional and explained in
[edit protocols mpls statistics]
statement at the
[edit protocols mpls label-switched-path
interval
hierarchy level), you should
hierarchy level). See also
613

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents