Juniper ACX1000 Configuration Manual page 1260

ACX Series Universal Access Router Configuration Guide
Table 95: jnxSoamDmCfgTable (continued)
Object
jnxSoamDmCfgTestTlvPattern
jnxSoamDmCfgNumIntervalsStored
jnxSoamDmCfgDestMepId
1202
Object ID
jnxSoamDmCfgEntry 11
jnxSoamDmCfgEntry 12
jnxSoamDmCfgEntry 13
Description
Specifies the type of test pattern to be sent
in the DM frame Test TLV when the size of
DM PDU is determined by the
jnxSoamDmFrameSize object and
jnxSoamDmTestTlvIncluded is 'true'.
If the frame size object does not define the
DM frame size or
jnxSoamDmTestTlvIncluded is 'false' the
value of this object is ignored.
This object can only be written at row
creation time and cannot be modified once
it has been created.
Specifies the number of completed
Measurement Intervals to store in the history
statistic table
(jnxSoamDmHistoryStatsTable) At least 32
completed Measurement Intervals need to
be stored. 96 Measurement Intervals are
recommended to be stored.
This object can only be written at row
creation time and cannot be modified once
it has been created.
Specifies the Maintenance Association End
Point Identifier of another MEP in the same
Maintenance Association to which the SOAM
DM frame is to be sent.
This address will be used if the value of the
column jnxSoamDmDestIsMepId is 'true'. A
value of zero means that the destination
MEP ID has not been configured.
This object is only valid for the entity
transmitting the Delay Measurement frames,
types 'dmDmm' and 'dm1DmTx'. It is not
applicable for the 'dm1DmRx' type.
This object can only be written at row
creation time and cannot be modified once
it has been created.
Copyright © 2017, Juniper Networks, Inc.