Juniper ACX1000 Configuration Manual page 1253

Table 95: jnxSoamDmCfgTable (continued)
Object
Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
Object ID Description
Contains a vector of bits that indicates the
type of SOAM DM counters found in the
jnxSoamDmMeasuredStatsTable,
jnxSoamDmCurrentStatsTable,
jnxSoamDmHistoryStatsTable that are
enabled.
A bit set to '1' enables the specific SOAM DM
counter. A bit set to '0' disables the SOAM
DM counter.
If a particular SOAM DM counter is not
supported the BIT value is set to '0'.
Not all SOAM DM counters are supported
for all SOAM DM types.
This object can only be written at row
creation time and cannot be modified after
it has been created.
bSoamPdusSent(0)—Enables or disables
the jnxSoamDmCurrentStatsSoamPdusSent
and
jnxSoamDmHistoryStatsSoamPdusSent
counters.
bSoamPdusReceived(1)—Enables or
disables the
jnxSoamDmCurrentStatsSoamPdusReceived
and
jnxSoamDmHistoryStatsSoamPdusReceived
counters.
bFrameDelayTwoWayBins(2)—Enables or
disables the
jnxSoamDmCurrentStatsBinsEntry counter
and the jnxSoamDmHistoryStatsBinsEntry
counter when the
jnxSoamDmCfgMeasBinType is
'twoWayFrameDelay'.
bFrameDelayTwoWayMin(3)—Enables or
disables the
jnxSoamDmCurrentStatsFrameDelayTwoWayMin
and
jnxSoamDmHistoryStatsFrameDelayTwoWayMin
counters.
bFrameDelayTwoWayMax(4)—Enables or
disables the
jnxSoamDmCurrentStatsFrameDelayTwoWayMax
and
jnxSoamDmHistoryStatsFrameDelayTwoWayMax
counters.
bFrameDelayTwoWayAvg(5)—Enables or
disables the
1195