Configuring The Ieee 802.1P Field For Cos Host Outbound Traffic In Acx Series; Acx Series - Juniper ACX1000 Configuration Manual

Configuring the IEEE 802.1p Field for CoS Host Outbound Traffic in ACX Series

Related
Documentation
Configuring a Global Default IEEE 802.1p Value for All Host Outbound Traffic in ACX
Series
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
This topic provides a summary of the configuration for setting the IEEE 802.1p field in the
Ethernet frame header for host outbound traffic (control plane traffic). You can set a
global value for the priority code point that applies to all host outbound traffic.
Additionally, or alternatively, you can specify that rewrite rules are applied to all host
outbound traffic on egress logical interfaces. These are rules that have been previously
configured to set the IEEE 802.1p field for data traffic on those interfaces.
To configure the IEEE 802.1p field settings:
(Optional) Specify a global default value for the IEEE 802.1p field for all host outbound
1.
traffic.
See "Configuring a Global Default IEEE 802.1p Value for All Host Outbound Traffic in
ACX Series" on page 889.
(Optional) Specify that the IEEE 802.1p rewrite rules for the egress logical interfaces
2.
are applied to all host outbound traffic on those interfaces.
See "Applying Egress Interface Rewrite Rules to the IEEE 802.1p Field for All Host
Outbound Traffic on the Interface in ACX Series" on page
Configuring a Global Default IEEE 802.1p Value for All Host Outbound Traffic in ACX
Series on page 889
Applying Egress Interface Rewrite Rules to the IEEE 802.1p Field for All Host Outbound
Traffic on the Interface in ACX Series on page 890
This topic describes how to configure a global default value for the IEEE 802.1p field for
all host outbound traffic on ACX Series routers.
To configure a global default value for the IEEE 802.1p field:
Specify the value.
[edit class-of-service host-outbound-traffic ieee-802.1]
user@host# set default value
For example, specify that a value of 010 is applied to all host outbound traffic:
[edit class-of-service host-outbound-traffic ieee-802.1]
user@host# set default 010
Configuring the IEEE 802.1p Field for CoS Host Outbound Traffic in ACX Series on
page 889
Chapter 27: Configuring Class of Service
890.
889