E1-Options - Juniper ACX1000 Configuration Manual

e1-options

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
e1-options {
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
fcs (16 | 32);
framing (g704 | g704-no-crc4 | unframed);
idle-cycle-flag (flags | ones);
invert-data;
loopback (local | remote);
start-end-flag (filler | shared);
timeslots time-slot-range;
}
[edit interfaces interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Configure E1-specific physical interface properties.
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Channelized E1 IQ and IQE Interfaces Overview
Channelized STM1 Interfaces Overview
E1 Interfaces Overview
T1 Interfaces Overview
Chapter 41: Configuration Statements
.
CLI Explorer
1503