Juniper ACX1000 Configuration Manual page 1238

ACX Series Universal Access Router Configuration Guide
Table 91: jnxSoamLmCfgTable (continued)
Object
jnxSoamLmCfgDataPattern
jnxSoamLmCfgTestTlvIncluded
jnxSoamLmCfgTestTlvPattern
jnxSoamLmCfgNumIntervalsStored
1180
Object ID Description
Specifies the LM data pattern included in a Data TLV when
JnxSoamLmCfgEntry
the size of the LM frame is determined by the
9
jnxSoamLmFrameSize object and
jnxoamLmTestTlvIncluded is 'false'.
If the frame size object does not define the LM frame size
or jnxSoamLmTestTlvIncluded is 'true' the value of this
object is ignored.
This object can only be written at row creation time and
cannot be modified once it has been created.
Indicates whether a Test TLV or Data TLV is included when
JnxSoamLmCfgEntry
the size of the LM frame is determined by the
10
jnxSoamLmFrameSize object.
A value of 'true' indicates that the Test TLV is to be
included. A value of 'false' indicates that the Data TLV is
to be included.
If the frame size object does not define the LM frame size
the value of this object is ignored.
This object can only be written at row creation time and
cannot be modified once it has been created.
Specifies the type of test pattern to be sent in the LM
JnxSoamLmCfgEntry
frame Test TLV when the size of LM PDU is determined
11
by the jnxSoamLmFrameSize object and
jnxSoamLmTestTlvIncluded is 'true'.
If the frame size object does not define the LM frame size
or jnxSoamLmTestTlvIncluded is 'false' the value of this
object is ignored.
This object can only be written at row creation time and
cannot be modified once it has been created.
Specifies the number of completed Measurement Intervals
JnxSoamLmCfgEntry
to store in the history statistic table
12
(jnxSoamLmHistoryStatsTable) At least 32 completed
Measurement Intervals need to be stored. 96
Measurement Intervals are recommended to be stored.
This object can only be written at row creation time and
cannot be modified once it has been created.
Copyright © 2017, Juniper Networks, Inc.