Configuring An Interface-Specific Counter For Vpls; Configuring An Action For The Vpls Filter; Applying A Vpls Filter To An Interface - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
1272
}
then {
actions;
}
}
}
For more information about how to configure firewall filters, see the Routing Policies,
Firewall Filters, and Traffic Policers Feature Guide. For information on how to configure a
VPLS filter match condition, see
page 1070.
To configure a filter for VPLS traffic, complete the following tasks:
Configuring an Interface-Specific Counter for VPLS on page 1272
Configuring an Action for the VPLS Filter on page 1272
Applying a VPLS Filter to an Interface on page 1272

Configuring an Interface-Specific Counter for VPLS

When you configure a firewall filter for VPLS and apply it to multiple interfaces, you can
specify individual counters specific to each interface. This allows you to collect separate
statistics on the traffic transiting each interface.
To generate an interface-specific counter for VPLS, you configure the
statement. A separate instantiation of the filter is generated. This filter instance has a
different name (based on the interface name) and collects statistics on the interface
specified only.
To configure interface-specific counters, include the
[edit firewall family vpls filter filter-name]
[edit firewall family vpls filter filter-name]
interface-specific;
NOTE: The counter name is restricted to 24 bytes. If the renamed counter
exceeds this maximum length, it might be rejected.
For more information about the
configure it, see the Routing Policies, Firewall Filters, and Traffic Policers Feature Guide.

Configuring an Action for the VPLS Filter

You can configure the following actions for a VPLS filter at the
filter filter-name term term-name then]
forwarding-class , loss-priority

Applying a VPLS Filter to an Interface

To apply a VPLS filter to an interface, include the
filter {
input input-filter-name;
"Firewall Filter Match Conditions for VPLS Traffic" on
interface-specific
hierarchy level:
interface-specific statement and an example of how to
hierarchy level:
accept
, policer .
statement:
filter
Copyright © 2017, Juniper Networks, Inc.
interface-specific
statement at the
[edit firewall family vpls
, , ,
count discard