Juniper ACX1000 Configuration Manual page 869

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
single interface. However, the unicast RPF status is shown as enabled only on interfaces
for which you have explicitly configured unicast RPF. Thus, the
on interfaces for which you have not explicitly configured unicast RPF even though unicast
RPF is implicitly enabled on all interfaces on EX3200 and EX4200 switches.
show interfaces xe-
Example: Configuring Unicast RPF on an EX Series Switch
Configuring Unicast RPF on ACX Series Routers on page 804
Configuring Unicast RPF (CLI Procedure)
Disabling Unicast RPF (CLI Procedure)
Troubleshooting Unicast RPF
Chapter 25: Configuring Layer 2 and Layer 3 Services
flag is not displayed
uRPF
811