Aggregate (Acx Series) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

aggregate (ACX Series)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1422
aggregate global
[edit firewall policer policer-name if-exceeding]
Statement introduced in Junos OS Release 12.3X54 for ACX Series Routers.
Define an aggregate policer as a single parent policer across all the child policer instances
in the system. A single instance of the policer is created system-wide.
You must then link or associate the child policers to the parent or aggregate policer by
specifying at each child policer by using the
statement at the
[edit firewall policer policer-name if-exceeding]
is additional, from the procedure to create a single-level policer, to configure a hierarchical
policer.
global —Indicates that the aggregate policer is a parent and applicable globally throughout
the system.
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Hierarchical Policers on ACX Series Routers Overview on page 920
Guidelines for Configuring Hierarchical Policers on ACX Routers on page 921
Hierarchical Policer Modes on page 923
Processing of Hierarchical Policers on page 928
Actions Performed for Hierarchical Policers on page 929
Configuring Aggregate Parent and Child Policers on ACX Series Routers on page 931
aggregate-policing aggregate-policer-name
hierarchy level. This step
Copyright © 2017, Juniper Networks, Inc.