Cesopsn-Options - Juniper ACX1000 Configuration Manual

cesopsn-options

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
cesopsn-options {
excessive-packet-loss-rate {
sample-period milliseconds;
threshold percentile;
}
idle-pattern pattern;
jitter-buffer-latency milliseconds;
jitter-buffer-packets packets;
packetization-latency microseconds;
}
[edit interfaces interface-name]
Statement introduced in Junos OS Release 12.2R1.
Statement introduced in Junos OS Release 12.3R1 for ACX Series Universal Access Routers.
Set Circuit Emulation Service over Packet-Switched Network (CESoPSN) protocol
options.
You can configure the following CESoPSN options:
idle-pattern —An 8-bit hexadecimal pattern to replace TDM data in a lost packet (from
0 through 255).
—Number of packets in the jitter buffer (from 1 through 64 packets).
jitter-buffer-packets
jitter-buffer-latency —Time delay in the jitter buffer (from 1 through 1000 milliseconds).
—Time required to create packets (from 1000 through 8000
packetization-latency
microseconds).
excessive-packet-loss-rate
—Time required to calculate the excessive packet loss rate (from 1000
sample-period
through 65,535 milliseconds).
—Percentile designating the threshold of excessive packet loss rate (1–100
threshold
percent).
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting the CESoPSN Options on page 216
—Set packet loss options. The option is
Chapter 41: Configuration Statements
sample-period
.
1459