Juniper ACX1000 Configuration Manual page 1259

Table 95: jnxSoamDmCfgTable (continued)
Object
jnxSoamDmCfgFrameSize
jnxSoamDmCfgDataPattern
jnxSoamDmCfgTestTlvIncluded
Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
Object ID
jnxSoamDmCfgEntry 8
jnxSoamDmCfgEntry 9
jnxSoamDmCfgEntry 10
Description
Specifies the Delay Measurement frame size
between 64 bytes and the maximum
transmission unit of the EVC.
The range of frame sizes from 64 through
2000 octets need to be supported, and the
range of frame sizes from 2001 through
9600 octets is suggested to be supported.
The adjustment to the frame size of the
standard frame size is accomplished by the
addition of a Data or Test TLV. A Data or
Test TLV is only added to the frame if the
frame size is greater than 64 bytes.
This object is only valid for the entity
transmitting the Delay Measurement frames
(dmDmm, dm1DmTx) and is ignored by the
entity receiving frames.
In addition, this object is not valid when
jnxSoamDmCfgVersion is 0.
This object can only be written at row
creation time and cannot be modified once
it has been created.
Specifies the DM data pattern included in a
Data TLV when the size of the DM frame is
determined by the jnxSoamDmFrameSize
object and jnxSoamDmTestTlvIncluded is
'false'. If the frame size object does not
define the DM frame size or
jnxSoamDmTestTlvIncluded is 'true' the
value of this object is ignored.
This object can only be written at row
creation time and cannot be modified once
it has been created.
Indicates whether a Test TLV or Data TLV
is included when the size of the DM frame is
determined by the jnxSoamDmFrameSize
object.
A value of 'true' indicates that the Test TLV
is to be included. A value of 'false' indicates
that the Data TLV is to be included.
If the frame size object does not define the
DM frame size the value of this object is
ignored.
This object can only be written at row
creation time and cannot be modified once
it has been created.
1201