Juniper ACX1000 Configuration Manual page 1247

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Table 94: jnxSoamLmHistoryStatsTable
Object
jnxSoamLmHistoryStatsIndex
jnxSoamLmHistoryStatsEndTime
jnxSoamLmHistoryStatsElapsedTime
jnxSoamLmHistoryStatsSuspect
jnxSoamLmHistoryStatsForwardTransmittedFrames
Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)
Object ID
jnxSoamLmHistoryStatsEntry 1
jnxSoamLmHistoryStatsEntry 2
jnxSoamLmHistoryStatsEntry 3
jnxSoamLmHistoryStatsEntry 4
jnxSoamLmHistoryStatsEntry 5
Description
Specifies the index for the Measurement
Interval within this PM session.
Measurement Interval indexes are
assigned sequentially by the SNMP
Agent. The first Measurement Interval
that occurs after the session is started is
assigned index 1. Measurement Intervals
for FLR (stored in this table) are based
on iterator count and are indexed
independently of Measurement Intervals
for availability
Referential integrity is necessary, i.e., the
index needs to be persistent upon a
reboot or restart of a device. The index is
never reused while this session is active
until it wraps to zero. The index value
keeps increasing up to that time.
Specifies the time at which the
Measurement Interval ended.
Specifies the length of time that the
Measurement Interval ran for, in 0.01
seconds.
Indicates whether the Measurement
Interval has been marked as suspect. The
object is set to true when there is a
discontinuity in the performance
measurements during the Measurement
Interval. Conditions for a discontinuity
include, but are not limited to the
following:
1—The local time-of-day clock is adjusted
by at least 10 seconds
2—The conducting of a performance
measurement is halted before the current
Measurement Interval is completed
3—A local test, failure, or reconfiguration
that disrupts service
Contains the number of frames
transmitted in the forward direction by
this MEP. For a PM Session of types
lmLmm and lmCcm this includes
Ethernet Service Frames and SOAM PDUs
that are in a higher MEG level only. For a
PM Session of type lmSlm this includes
the count of OAM ETH-SLM frames only.
1189

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents