Configuring Ipv6 On The Pe Router; Configuring The Connection Between The Pe And Ce Routers; Configuring Bgp On The Pe Router To Handle Ipv6 Routes - Juniper ACX1000 Configuration Manual

Configuring IPv6 on the PE Router

Configuring the Connection Between the PE and CE Routers

Copyright © 2017, Juniper Networks, Inc.
The following sections explains how to configure IPv6 VPNs between the PE routers:
Configuring IPv6 on the PE Router on page 845
Configuring the Connection Between the PE and CE Routers on page 845
Configuring IPv6 on the Interfaces on page 847
To configure IPv6 between the PE and CE routers, include the
in the configuration on the PE router:
family inet6-vpn {
(any | multicast | unicast) {
aggregate-label community community-name;
prefix-limit maximum prefix-limit;
rib-group rib-group-name;
}
}
For a list of hierarchy levels at which you can configure this statement, see the statement
summary section for this statement.
You also must include the
ipv6-tunneling;
You can include this statement at the following hierarchy levels:
[edit protocols mpls]
[edit logical-systems logical-system-name protocols mpls]
To support IPv6 routes, you must configure BGP, OSPF version 3, IS-IS, or static routes
for the connection between the PE and CE routers in the Layer 3 VPN. You can configure
BGP to handle just IPv6 routes or both IP version 4 (IPv4) and IPv6 routes.
For more information about IPv6, see Junos OS Routing Protocols Library.
For more information about IS-IS see Example: Configuring IS-IS,
The following sections explain how to configure BGP and static routes:
Configuring BGP on the PE Router to Handle IPv6 Routes on page 845
Configuring BGP on the PE Router for IPv4 and IPv6 Routes on page 846
Configuring OSPF Version 3 on the PE Router on page 846
Configuring Static Routes on the PE Router on page 847

Configuring BGP on the PE Router to Handle IPv6 Routes

To configure BGP in the Layer 3 VPN routing instance to handle IPv6 routes, include the
bgp statement:
ipv6-tunneling statement:
Chapter 26: Configuring Layer 3 VPNs
family inet6-vpn statement
845