Tftp Load - Siemens SCALANCE XC-200 Configuration Manual

Configuration
3.2 Load and Save
The file type decides the type that is affected by the tftp load or tftp save action. The
name decides the file to be copied to or from the TFTP server.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp filename {showfiles|filetype< filetype >name<filename>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
name
filename
Result
The file types are displayed or the file type is assigned a name.
Further notes
With the "show loadsave files" command, you can display the file types.
3.2.6.5

tftp load

Firmware
The firmware is signed and encrypted. This ensures that only firmware created by Siemens
can be downloaded to the device.
Description
With this command, you load a file from a TFTP server into the file system of the device. The
TFTP protocol is used for the transfer. You can also display a list of available files.
98
Description
Shows the available files
Keyword for a file type to be assigned a
name
Name of the file type
Keyword for a file name to be assigned
to the file type
Name of the file
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
-
-
max. 100 characters
-
max. 100 characters
Configuration Manual, 07/2017, C79000-G8976-C361-06