System Location; System Name - Siemens SCALANCE XC-200 Configuration Manual

system contact <contact info>
The parameter has the following meaning:
Parameter
contact info
Result
The contact information is created in the system.
3.1.9.11

system location

Description
With this command, you enter the location information for the system.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system location <location name>
The parameter has the following meaning:
Parameter
location name
Result
The location information is created in the system.
3.1.9.12

system name

Description
This command, you enter a name for the system.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Input box for contact information
Description
Input box for the location information
Configuration
3.1 System
Range of values / note
max. 255 characters
Range of values / note
max. 255 characters
73