Room Monitor - Siemens HiPath 1100 User Manual

Miscellaneous functions
Step by step
Speaker

Room monitor.

Speaker
78
Room Monitor
The Room Monitor feature uses a telephone handset as
a microphone to capture audio signals in a room.
To enable
qll
Enter the code to enable the Room Monitor feature.
(*88)
n
Lift the handset and position it towards the object to be
monitored.
or
Press this key. The LED comes on
or .
Press the "Room monitor" key.
To deactivate
t
Replace the handset.
or
Press this key. The LED goes off.
Room Monitor
... From an extension
p
Enter the extension number for the room you want to
monitor (e.g., 11/101).
ws
Wait. The user calls the extension assigned to the fea-
ture to hear the audio signals present.
... From an external telephone
Required: The telephone must be a DTMF telephone
or you must be able to switch it to DTMF . The telephone
is not connected to the system.
[1] When the Fax/DID module is installed, you can monitor an environ-
ment even from an external telephone. After the answering mes-
sage completes, enter the extension number assigned to the
feature, then enter the extension password (same as the electron-
ic lock).
This cannot be activated for an overflow extension or members of
a Hunt group.
1