Severity Filters - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.4 The "System" menu
– Link Check
– CLI script file
Steps in configuration
1. Select the check box in the row of the required event. Select the event in the column under
the following actions:
– E-mail
– Trap
– Log Table
– Syslog
– Faults
2. Click the "Set Values" button.
5.4.7.2

Severity Filters

Setting the Severity Filters
On this page, set the threshold levels for sending system event notifications.
The first table column shows the client type for which you are making the settings:
● E-mail
Sending system event messages by e-mail
● Log Table
Entry of system events in the log table
● Syslog
Sending of system event messages to a Syslog server.
Select the required level from the drop-down lists of the second table column.
170
A disruption was detected on an optical transmission link.
An error was detected in the CLI script:
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12